Earthing Product Tester Guide

The Earthing Product & Continuity Tester checks your Earthing products and grounding cords to ensure that they are in working order and hold a connection. Follow the instructions below to test your products. A green light will indicate that a product and cords are in good working order.

If you would like more information on the Product Tester, or need to purchase one for yourself, see the Product & Continuity Tester product page.

Step 1

Insert the splitter plug into your grounded electrical outlet.

Step 2

Insert the connection cord that you will attach to the earthing product into one side of the splitter.

Step 3

Attach the other end of the connection cord to the earthing product you would like to test.

Step 4

Insert the connection cord that came with the earthing product tester into the other side of the splitter.

Step 5

Connect the other end of the second cord to the earthing product tester and then slide the bottom side of the tester (with the silver circle) against the earthing product while press and HOLDING the “TEST” button on the front of the tester. The green light should come on to indicate that the earthing product and connection cords are working correctly.

Note: Be sure to remove the little plastic tab from the unit before using (this tab saves the battery from being drained)