How to Use Your: Ground Therapy Throw Blanket

The New Ground Therapy Throw is a plush cotton conductive blanket to wrap you in grounded comfort.

Follow these instructions to properly set up your Ground Therapy Throw:

Step 1: Check Your Outlets

Find an outlet in your home where you plan to use your Ground Therapy Throw
Plug the Outlet Checker directly into the 3-prong outlet.
Look for 2 amber lights to illuminate. This confirms your outlet is properly grounded and ready for use.

- See here for more details!
- If you see any other light combination, your outlet is NOT properly grounded. In this case, you can use a Grounding Rod (sold separately) to establish a proper ground connection or test other outlets in your home.

Step 2: (Optional) Plug in the Safe-T Cube Adapter

- The Safe-T Cube allows you to connect multiple Earthing products to one ground port at a time, but it is not necessary to use your Grounded Socks.

Step 3: Set Up the Ground Therapy Throw

Use the straps to secure the Ground Therapy Throw directly to your mattress – over or under your fitted sheet.
Connect the other side of the Connection Cord to the snap nub on the Ground Therapy Throw.
Please allow a few minutes in order to make the connection.
We recommend using wearing only the Ground Therapy Throw, so they are directly on you

Care Instructions: How to Wash and Care for Your Ground Therapy Throw

To keep your Ground Therapy Throw in excellent condition and maintain its conductivity:

Cleaning the Ground Therapy Throw: Wipe down the Ground Therapy Throw using a non-corrosive cleaner. Do not use chlorine bleach, fabric softener, or any detergent containing bleach or softeners, as they can damage the mat’s conductivity.
Avoid lotions and creams: Do not apply lotions, creams, or oils to the parts of your body that will be in contact with the Ground Therapy Throw as these substances can oxidize and reduce conductivity over time.
Air Dry: Let the Ground Therapy Throw air dry after cleaning. Do not use high heat or direct sunlight for extended periods as this may damage the materials.