B1 Premium Cube 5G
The B1 Premium Cube offers powerful, active EMF protection at the cell level in high 5G environments near cell towers or 5G small cell repeaters. Ideal for home and working spaces, factories, hospitals, and schools, the B1 Premium Cube protects an area up to 90 meters in every direction and is suitable for use in protection from high EMF and 5G areas.
ON BACKORDER: YOU MAY PURCHASE AT THIS TIME AND ORDERS WILL BE SHIPPED APPROXIMATELY NOVEMBER 28TH
The B1 Premium Cube model comes in carbon blue and silver alloy. This model is the new version of the former Premium Cube Gen 2, with the same internal functioning. The only difference is the case material.
The B1 Premium Cube model can be used to protect you wherever there is high powered microwave radiation from WIFI or other related microwave output devices including 5G arrays and smart meters. Best suited when 5G antenna masts or arrays are within close proximity, within 1km. The B1 Premium Cube will protect in the 40GHz -300GHz range (5G), but is also effective at the lower range from 0-40GHz range (3G 4G 4G+). The B1 Premium Cube has the same power output and coverage as the Blushield Home Cube with the added benefit of a constant output of Phi ratio patterns. The constant Phi ratio frequencies are designed to help the body recover even faster from the high frequency radiation that 5G emits.
The B1 Premium Cube is half the strength of the Premium Ultra. It is recommended for use where high powered microwave radiation pervades the local vicinity. The waveform is suitable for intense 5G areas where many arrays of aerials are nearby.
Since the B1 Premium Cube emits additional waveforms compared to the regular Cube to help the body recover more quickly from high levels of EMF (such as being in direct line of sight of a 5G repeater), you will notice that your device emits a solid red light, rather than the every-half-minute flashing light of all the other devices. This indicates that one of the sets of waveforms emitted is constant, instead of intermittent, and shows that your device is working properly.
The new waveform structure also contains the on/off pulsing frequencies that the standard Cube contains, with the added benefit of the constant frequency set that supports repair and regeneration continually. This pulsing may be hard to see, as the other light is solid. But taken into a dark room, the intermittent light can be seen through the constant light emitted for the constant set of waveforms.
The B1 Premium Cube model comes in a Carbon Blue and Silver Alloy case that is table mounted via a 3M soft pad. This model boasts a unique delivery system unlike previous model versions.
We recommend you purchase a Premium Portable model to carry with you when you are away from your protected zone. This will maintain a level of protection so you will not tire easily. Or check out the B1 Premium Cube Bundle for a discount on the B1 Premium Cube and 2 x Premium Portables.
- Designed for living and working areas where there is a high level 5G radiation
- Unique delivery system
- Will protect in the 40Ghz-300Ghz range
- Coverage 90m (295 feet) in every direction
- Table mounted Alloy case with a pleasant look
- Size 100mm x 100mm x 115mm – about 4 x 4 x 6 inches
- Weight 650g – about 1.4 pounds
- Uses multiple scalar waveform outputs with new waveform format
- Great for homes, offices and schools where EMF is extreme
- The best protection from microwave radiation
- May reduce fatigue associated with EMF especially 5G
- Promotes emotional stability
- Enables restful sleep
- May increase energy levels
- Comes with 12V power pack and adapters